|
Quick Start
After the Video Surveillance WebCam Software is installed and running one needs to
configure the program based on the hardware using and the features one wants to
use. One can setup a basic configuration for recording and monitoring, and later
do advanced configuration of features like live video streaming, files
streaming, and alarms.
There are two ways to do the basic configuration:
(a) click on menu item or button, Quick Config, in the Video Surveillance WebCam Software, and follow the steps displayed.
or
(b) Manually configure the Program as follows:
try using the
following menu items or buttons:
- Select Video Driver -
select the driver for your video capture device. You may have to use Video
Source to further specify which driver to use.
- Settings, Global Settings, put check mark beside, Program Sets Format,
and Program Sets Compression, and choose your Language Settings, click OK.
- Settings, Video Audio Configuration, Video
Source, select your video input or Composite if available.
- Settings, Video Audio Configuration, Video
Format, select RGB24 , and image size e.g. 160x120.
- Settings, Video Audio Configuration, Program
Sets Compression, select Microsoft Windows Media Video 9, or MPEG-4 Video
Codec V1, or Cinepak Codec by Radius, which ever one is available. Click OK.
- Click on Settings, Save
Configuration - important.
- Settings, Video Audio Configuration, Select Hardware Type -
select the type of video capture hardware you are using, if available from
the version of the software you have. Then restart the program.
- Configure Cameras: click on
buttons number 0 through 10 and place a check mark beside Enable Camera, to
enable use of the cameras you have plugged in to your video capture device.
Click OK.
- Click on button, Save
Configuration.
- Click on button, Record. To record
some video.
- Click on button, Stop. To stop
recording.
- Click on button, Review. To
display and review the recorded video.
Using Record button is the easiest way to do video monitoring. Then just use
the Record More, and Switch
Faster slider bars, along with Video
Color or Video Source buttons to
change the picture brightness and contrast. Using Monitor
requires more adjustments for the motion detection.
For more detailed information read the help documentation from the beginning
in sequence, and also see:
Software Configuration
|